Equipment

Lattice Boom Cranes
Truck Cranes
Industrial Cranes
All Terrain Cranes
Boom Trucks

  • Parts in stock and ready to deliver
  • On-site service for any brand, any model
  • Equipment available for immediately delivery
Services
Technical on-site field service by factory trained technicians
Product and parts support
Preventive maintenance programs
Rental Purchase Order Equipment
New Equipment
Used Equipment
Financing assistance
Third party crane inspection certification
Emergency parts and service available 24/7
 
 

Crane Inspection

 

Factory authorized repair procedures assure OSHA compliance

Factory trained technicians
Any brand, any model

Repairs include correcting deficiencies that are identified during an OSHA crane inspection.

Examples of repairs

  • Correct any damage, including frame, boom, and cracked welds on outriggers
  • Fix problems with LMI, A2B, and angle indicator operation
  • Replace and/or adjust wire rope, hook block and safety latch, decals/load charts, glass, safety items
  • Adjust hook block, ball and beckets
  • Replace linings and master clutch
  • Replace/adjust boom alignment, boom retract cables, gauges, belts
  • Repair brake operation

An estimate for any required repairs will be provided prior to commencement of repairs.

Convenient options

  • Pick-up and drop off service for your location
  • A factory trained technician can be dispatched to your location (travel time may be additional)

 

Annual inspections

A thorough, annual inspection of the hoisting machinery must be made by a competent person, or by a government or private agency recognized by the U.S. Department of Labor.
 

Inspections at each shift and monthly

The employer must designate a competent person to inspect all machinery and equipment prior to each shift the equipment will be used, and completed before or during the shift, to make sure it is in safe operating condition. Any deficiencies must be repaired, or defective parts replaced, before continued use. Monthly inspections must also be conducted with the same requirements.
 

Inspections following repairs/adjustments and modifications

A qualified person must inspect equipment that has had modifications, additions or repairs that affect the safe operation of the equipment before it is used for the first time following the changes.
 

Wire rope inspection

A competent person must inspect the wire ropes that are likely to be used during the shift, and the inspection must be
completed before or during the shift. The inspection is to identify apparent deficiencies, such as significant distortion of the wire rope structure, corrosion, electric arc damage, heat damage, improperly applied end connections, and visible broken wires. Monthly and annual inspections are also required.
 

Documentation

The employer must maintain a record of the dates and results of inspections for each hoisting machine and piece of equipment.
 

Comply with the crane manufacturer’s specifications

The employer must comply with the manufacturer’s specifications and limitations applicable to the operation of any and all cranes and derricks. Attachments used with cranes shall not exceed the capacity, rating, or scope recommended by the manufacturer.
 

Conspicuously post requirements on equipment

Rated load capacities, and recommended operating speeds, special hazard warnings, or instructions must be posted on equipment in a location that is visible to the operator while he is at his control station.
 

Use ANSI standard hand signals.

Illustrations of signals must be posted at the jobsite.
 

Additional requirements are specified to protect employees from injury while working on or near the cranes.